Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
Everbuild 703 Fix and Grout Tile Adhesive Grout Mould Resistant Brilliant White
Stock Code:
FIX005
View All: Adhesives
View All Everbuild Sika Products
View All: Parcel Fillers - Items £10 or Under
£4.25
£3.54
In stock - FREE STANDARD DELIVERY to most UK postcodes - Next Day Delivery Available
Description
Fix & Grout Tile Adhesive is a premium grade adhesive formulated to be used as both an adhesive and grout. The product contains a fungicide to prevent mould growth and dries to a brilliant white finish. Tested to EN12004 type D2T.
750g Tub.
Benefits
Excellent water resistance.
Extremely high bond strength - over double the B.S. minimum requirement in wet shear (7 days
drying, 7 days water immersion followed by shearing whilst wet).
Compressible - allows for slight thermal movement.
Dries brilliant white.
Contains a fungicide - prevents mould growth.
Ready mixed formula - no mixing, no mess. Apply straight from the tub.
Easier to apply than most competitive adhesives.
Extended open time.
Areas for Use
Kitchen/Bathroom walls.
Shower areas.
Communal and power showers
Work tops subject to water contact.
Limitations
Unsuitable for floors.
Do not use for swimming pools. Use EVERBUILD 705 RAPID SET TILE MORTAR
Do not use externally. Use EVERBUILD 705 RAPID SET TILE MORTAR.
When used as a grout, allow to dry for 7 days before using showers/baths.
Surface Preparation
PLASTER
New plaster must be a minimum of 4 weeks old before tiling. Tile onto finishing coat only. Prime with
EVERBUILD PVA diluted 1:3 with water.
PLASTERBOARD/PLYWOOD/CHIPBOARD
Must be braced with seasoned timber at 300mm vertically and horizontally. Use moisture resistant
grades. All surfaces and edges must be sealed with EVERBUILD SBR diluted 1:4 with water.
SAND/CEMENT RENDER
Allow at least four weeks drying before tiling. Use a mix design of 3 to 4 parts sand to 1 part
cement. Prime with EVERBUILD PVA.
BRICKWORK/BLOCKWORK/CONCRETE BLOCK
Allow at least 4 weeks drying time before rendering or plastering. Do not fix directly to blockwork.
EXISTING GLAZED TILES/FORMICA
Roughen surfaces with abrasive sander and prime with EVERBUILD PVA diluted 1:1 with water. Apply
adhesive whilst still tacky. Allow at least 5 days before grouting.
PAINTED SURFACES
Not recommended for direct application to emulsion or limewash paints. Remove loose material and
prime with EVERBUILD PVA Mix diluted 1:4 with water.
For gloss paints, degrease and score with knife to provide key for adhesive. Allow at least five days
drying before grouting.
Application
AS AN ADHESIVE
All surfaces should be clean, dry and free of dust and loose material before commencing. Refer to
directions for specific surfaces.
Surfaces to be tiled must be clean, dry and sound. Porous surfaces, including plaster, must be primed
with Everbuild PVA Bond diluted 1 to 3 with water and allowed to dry before tiling. Allow new plaster
to dry at least one month before tiling. Apply adhesive to wall at a depth of 3-6mm (no less than
3mm, no greater than 6mm) combing out an area of no greater than 1m2
at a time. In dry situations,
use a suitable notched trowel across the surface of the adhesive before placing the tiles into position
and securing with a slight twist action to remove air voids.
In areas subject to wet conditions, do not use a notched trowel. Bed the tiles directly into the surface
of the adhesive and again, secure with a slight twist action. In both situations, it is good practice to
periodically remove a tile and check that at least 75% of the tile is covered in adhesive. If this is not
the case, apply fresh adhesive and reposition.
All surplus adhesive must be removed whilst adhesive is still wet using a dampened cloth or sponge,
particularly along grout lines.
AS A GROUT
Apply by squeegee or sponge, working well into joints. Ensure no voids remain. Suitable for joint
widths up to 6mm. Allow adhesive to dry for 24- 72 hours before grouting depending on porosity.
Allow grout to dry for 7 days before using shower areas/baths.
Benefits
Excellent water resistance.
Extremely high bond strength - over double the B.S. minimum requirement in wet shear (7 days
drying, 7 days water immersion followed by shearing whilst wet).
Compressible - allows for slight thermal movement.
Dries brilliant white.
Contains a fungicide - prevents mould growth.
Ready mixed formula - no mixing, no mess. Apply straight from the tub.
Easier to apply than most competitive adhesives.
Extended open time.
Areas for Use
Kitchen/Bathroom walls.
Shower areas.
Communal and power showers
Work tops subject to water contact.
Limitations
Unsuitable for floors.
Do not use for swimming pools. Use EVERBUILD 705 RAPID SET TILE MORTAR
Do not use externally. Use EVERBUILD 705 RAPID SET TILE MORTAR.
When used as a grout, allow to dry for 7 days before using showers/baths.
Surface Preparation
PLASTER
New plaster must be a minimum of 4 weeks old before tiling. Tile onto finishing coat only. Prime with
EVERBUILD PVA diluted 1:3 with water.
PLASTERBOARD/PLYWOOD/CHIPBOARD
Must be braced with seasoned timber at 300mm vertically and horizontally. Use moisture resistant
grades. All surfaces and edges must be sealed with EVERBUILD SBR diluted 1:4 with water.
SAND/CEMENT RENDER
Allow at least four weeks drying before tiling. Use a mix design of 3 to 4 parts sand to 1 part
cement. Prime with EVERBUILD PVA.
BRICKWORK/BLOCKWORK/CONCRETE BLOCK
Allow at least 4 weeks drying time before rendering or plastering. Do not fix directly to blockwork.
EXISTING GLAZED TILES/FORMICA
Roughen surfaces with abrasive sander and prime with EVERBUILD PVA diluted 1:1 with water. Apply
adhesive whilst still tacky. Allow at least 5 days before grouting.
PAINTED SURFACES
Not recommended for direct application to emulsion or limewash paints. Remove loose material and
prime with EVERBUILD PVA Mix diluted 1:4 with water.
For gloss paints, degrease and score with knife to provide key for adhesive. Allow at least five days
drying before grouting.
Application
AS AN ADHESIVE
All surfaces should be clean, dry and free of dust and loose material before commencing. Refer to
directions for specific surfaces.
Surfaces to be tiled must be clean, dry and sound. Porous surfaces, including plaster, must be primed
with Everbuild PVA Bond diluted 1 to 3 with water and allowed to dry before tiling. Allow new plaster
to dry at least one month before tiling. Apply adhesive to wall at a depth of 3-6mm (no less than
3mm, no greater than 6mm) combing out an area of no greater than 1m2
at a time. In dry situations,
use a suitable notched trowel across the surface of the adhesive before placing the tiles into position
and securing with a slight twist action to remove air voids.
In areas subject to wet conditions, do not use a notched trowel. Bed the tiles directly into the surface
of the adhesive and again, secure with a slight twist action. In both situations, it is good practice to
periodically remove a tile and check that at least 75% of the tile is covered in adhesive. If this is not
the case, apply fresh adhesive and reposition.
All surplus adhesive must be removed whilst adhesive is still wet using a dampened cloth or sponge,
particularly along grout lines.
AS A GROUT
Apply by squeegee or sponge, working well into joints. Ensure no voids remain. Suitable for joint
widths up to 6mm. Allow adhesive to dry for 24- 72 hours before grouting depending on porosity.
Allow grout to dry for 7 days before using shower areas/baths.
Specifications
750g Tub
Appearance Thick white paste (dries & stays brilliant white)
SG at 20 C 1.7gcm (approx)
Application Temp 5o
C to 35oC
Service Temp -30 to 100oC.
Shear Adhesion (typical) 9kN (wet shear)
Open Time ~20 mins @20oC
Bed Thickness 3-6mm
Setting Time 24-72 hours (depending on substrate).
Specification Tested to EN12004 Type D2T
Coverage 1.7kg will fix and grout approx. 1m2
of tiling depending on size of tile.
Storage
Store at moderate temperatures. PROTECT FROM FROST
Minimum 12 months when stored according to manufacturer s instructions.
SG at 20 C 1.7gcm (approx)
Application Temp 5o
C to 35oC
Service Temp -30 to 100oC.
Shear Adhesion (typical) 9kN (wet shear)
Open Time ~20 mins @20oC
Bed Thickness 3-6mm
Setting Time 24-72 hours (depending on substrate).
Specification Tested to EN12004 Type D2T
Coverage 1.7kg will fix and grout approx. 1m2
of tiling depending on size of tile.
Storage
Store at moderate temperatures. PROTECT FROM FROST
Minimum 12 months when stored according to manufacturer s instructions.
EAN: 5029347600426
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard
Zone 1 – £9.99
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland.
Zone 2- £14.99
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary.
Zone 3 – £19.99
Estonia, Spain, Sweden, Italy, Portugal, Latvia.
Zone 4 – £29.99
Bulgaria, Finland, Romania.
Zone 5 – £49.99
Bosnia, Croatia, Switzerland.
Zone 6 – £59.99
Norway, Serbia, Iceland.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items.
If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review