Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
Everbuild Coving Adhesive and Joint Filler C3 Size Cartridge Pack of 12
Stock Code:
COVEBOX
View All: Adhesives
View All Everbuild Sika Products
£25.95
£21.62
In stock - FREE STANDARD DELIVERY to most UK postcodes - Next Day Delivery Available
Description
EVERBUILD COVING ADHESIVE is a high strength solvent free adhesive that provides a quick grab for fixing polystyrene and plaster coving and cornices to sound porous surfaces . This product will also act as a gap filling sealant for filling the gaps between individual lengths of coving. Coving Adhesive dries white and is overpaintable when dry.
Benefits
Solvent free - environmentally friendly formulation.
Excellent adhesion/bond strength - adheres to most common coving surfaces.
Exceptional early grab properties - usable in both vertical and horizontal positions.
High solids formulation - excellent gap filling properties without shrinkage.
Extended open time - allows for easy repositioning after fixing.
Will adhere to damp surfaces.
Water clean up - no hazardous solvents.
Areas For Use
For fixing and sealing polystyrene coving, ceiling centers tiles and other decorative polystyrene products to sound surfaces.
Fixing plaster coving
Filling gaps between coving sections.
Limitations
Do not use externally.
In damp, cold or humid conditions, curing time may be significantly extended.
New plastered walls must be a minimum of 4 weeks old before application of this adhesive.
Always provide temporary support until adhesive is fully cured.
Do not use in permanently damp/wet conditions.
Not suitable for Polyurethane coving/trim. Use EVERBUILD GUN A NAIL EXTRA adhesive.
Do not in situations where both surfaces are non -porous (ed plastic/plastic ) - use GUN A NAIL EXTRA
Surface Preparation
All surfaces must be sound, porous, clean, dry and free from dust, grease, loose material/flaky paint etc. Remove wallpaper from all areas in contact with adhesive.
Prime all substrates with EVERBUILD PVA BOND diluted 1 part PVA to 4 water and allow to dry.
Application
Cut tip of the cartridge taking care not to damage the thread.
Apply nozzle and cut cleanly at an angle of 45 degrees to give an opening of 6-9mm.
As a Coving adhesive: Apply using a standard sealant gun and spread to a depth of 3-6mm over entire area in contact with wall. Offer up coving and press well home. Immediately provide temporary support with panel pins until adhesive is completely dry (24-48 hours depending on ambient conditions). Removes excess adhesive with a damp cloth before it dries.
As a ceiling rose/polystyrene tile adhesive; firstly, ensure electricity supply is off at the mains. Leave off whilst working and only switch back on when the job is finished.
Polystyrene ceiling roses/tiles: Apply adhesive over entire rose/tile and comb with a suitable 3-6mm notched trowel. Offer up to sound, porous primed substrate and press home.
Plaster ceiling roses. Apply as above, but due to excess weight, always us in conjunction with mechanical fixings.
As a Joint Filler; Gun product into joint. Ensure all voids are filled. Smooth down with a damp cloth to an even finish. No sanding required. Overpaintable with emulsion paints in ca. 2 hours, or once a good skin has formed.
Benefits
Solvent free - environmentally friendly formulation.
Excellent adhesion/bond strength - adheres to most common coving surfaces.
Exceptional early grab properties - usable in both vertical and horizontal positions.
High solids formulation - excellent gap filling properties without shrinkage.
Extended open time - allows for easy repositioning after fixing.
Will adhere to damp surfaces.
Water clean up - no hazardous solvents.
Areas For Use
For fixing and sealing polystyrene coving, ceiling centers tiles and other decorative polystyrene products to sound surfaces.
Fixing plaster coving
Filling gaps between coving sections.
Limitations
Do not use externally.
In damp, cold or humid conditions, curing time may be significantly extended.
New plastered walls must be a minimum of 4 weeks old before application of this adhesive.
Always provide temporary support until adhesive is fully cured.
Do not use in permanently damp/wet conditions.
Not suitable for Polyurethane coving/trim. Use EVERBUILD GUN A NAIL EXTRA adhesive.
Do not in situations where both surfaces are non -porous (ed plastic/plastic ) - use GUN A NAIL EXTRA
Surface Preparation
All surfaces must be sound, porous, clean, dry and free from dust, grease, loose material/flaky paint etc. Remove wallpaper from all areas in contact with adhesive.
Prime all substrates with EVERBUILD PVA BOND diluted 1 part PVA to 4 water and allow to dry.
Application
Cut tip of the cartridge taking care not to damage the thread.
Apply nozzle and cut cleanly at an angle of 45 degrees to give an opening of 6-9mm.
As a Coving adhesive: Apply using a standard sealant gun and spread to a depth of 3-6mm over entire area in contact with wall. Offer up coving and press well home. Immediately provide temporary support with panel pins until adhesive is completely dry (24-48 hours depending on ambient conditions). Removes excess adhesive with a damp cloth before it dries.
As a ceiling rose/polystyrene tile adhesive; firstly, ensure electricity supply is off at the mains. Leave off whilst working and only switch back on when the job is finished.
Polystyrene ceiling roses/tiles: Apply adhesive over entire rose/tile and comb with a suitable 3-6mm notched trowel. Offer up to sound, porous primed substrate and press home.
Plaster ceiling roses. Apply as above, but due to excess weight, always us in conjunction with mechanical fixings.
As a Joint Filler; Gun product into joint. Ensure all voids are filled. Smooth down with a damp cloth to an even finish. No sanding required. Overpaintable with emulsion paints in ca. 2 hours, or once a good skin has formed.
Specifications
Specification
Quantity - 12
Form White thixotropic paste (ready to use)
Viscosity 350000-550000 cps (bfld HBDV2+, S70, 10RPM
Coverage One tube will cover approximately 1 full length of 2m coving when applied as directed
Solids 70-80%
Specific Gravity 1.48 g/cm
Open Time Max 10 mins at 23 C and 50% R.H
Application Temp +5 to +35 C
Service Temp -10 to +70 C
Typical Bond Strength (beech/beech 25mm ) 1 hour: 0.2 0.3 N/mm
24 hour: 3.5 N/mm
7 days: 4 N/mm
Quantity - 12
Form White thixotropic paste (ready to use)
Viscosity 350000-550000 cps (bfld HBDV2+, S70, 10RPM
Coverage One tube will cover approximately 1 full length of 2m coving when applied as directed
Solids 70-80%
Specific Gravity 1.48 g/cm
Open Time Max 10 mins at 23 C and 50% R.H
Application Temp +5 to +35 C
Service Temp -10 to +70 C
Typical Bond Strength (beech/beech 25mm ) 1 hour: 0.2 0.3 N/mm
24 hour: 3.5 N/mm
7 days: 4 N/mm
EAN: 5029347903923
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard
Zone 1 – £9.99
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland.
Zone 2- £14.99
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary.
Zone 3 – £19.99
Estonia, Spain, Sweden, Italy, Portugal, Latvia.
Zone 4 – £29.99
Bulgaria, Finland, Romania.
Zone 5 – £49.99
Bosnia, Croatia, Switzerland.
Zone 6 – £59.99
Norway, Serbia, Iceland.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items.
If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review