Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
Everbuild Everflex 200 Contractors LMA Silicone Brown 295ml Size Pack of 25
Stock Code:
200BNBOX
View All:
View All Everbuild Sika Products
£42.74
£35.62
Out of Stock - This Product is Currently Unavailable
Description
SILICONE 200 CONTRACTORS is a cost effective Acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to prevent mould growth in areas of high humidity. SILICONE 200 is mid to low modulus in nature.
Benefits
Permanently flexible.
Anti-fungal formula - prevents mold growth.
Quick curing - low dirt pick up.
Low viscosity for fast application
Certified under the harmonized European standard EN15651 for fa ade and sanitary applications in compliance with the Construction Product Regulations
Areas For Use
Sealing aluminium and metal sealing.
Sealing around baths, showers, basins and other sanitary ware.
As an adhesive for fixing PVCu trims, cladding and panels.
Sealing around worktops and laminates.
Pointing and door frames.
For aluminium gutter sealing.
General draughtproofing.
Limitations
Not for use in aquarium manufacture. Use EVERFLEX AQUAMATE.
Not for use in conjunction with bitumen, or asphalt. Use ALL WEATHER MATE.
Not for use on highly porous surfaces such as new concrete or stonework. Priming is advised or use SILICONE 450.
Not for use on substrates that may bleed oils, solvent or plasticisers.
Do not use in the vicinity of, or in conjunction with the edge sealant of double glazed units. Use SILICONE 450.
When applying to uPVC, priming is recommended. Always carry out an adhesion test before using on uPVC.
Do not use on soft metals such as lead and brass. Use LEADMATE SILICONE.
Non overpaintable. In applications where overpainting is required, use WEATHER MATE.
Surface Preparation
All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.
Application
Reference should be made to the recommended joint ratios. If necessary reduce joint depth using EXPANDING FILL AND FIX FOAM, or Joint backer rod. Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.
Smooth down within 10 minutes of application. To ensure a proper bond, always smooth the sealant down using a spatula or piece of wood wetted with a soap and water solution. An improved appearance can be achieved by placing masking tape to both sides of the joint and removing within 5 minutes of application.
Benefits
Permanently flexible.
Anti-fungal formula - prevents mold growth.
Quick curing - low dirt pick up.
Low viscosity for fast application
Certified under the harmonized European standard EN15651 for fa ade and sanitary applications in compliance with the Construction Product Regulations
Areas For Use
Sealing aluminium and metal sealing.
Sealing around baths, showers, basins and other sanitary ware.
As an adhesive for fixing PVCu trims, cladding and panels.
Sealing around worktops and laminates.
Pointing and door frames.
For aluminium gutter sealing.
General draughtproofing.
Limitations
Not for use in aquarium manufacture. Use EVERFLEX AQUAMATE.
Not for use in conjunction with bitumen, or asphalt. Use ALL WEATHER MATE.
Not for use on highly porous surfaces such as new concrete or stonework. Priming is advised or use SILICONE 450.
Not for use on substrates that may bleed oils, solvent or plasticisers.
Do not use in the vicinity of, or in conjunction with the edge sealant of double glazed units. Use SILICONE 450.
When applying to uPVC, priming is recommended. Always carry out an adhesion test before using on uPVC.
Do not use on soft metals such as lead and brass. Use LEADMATE SILICONE.
Non overpaintable. In applications where overpainting is required, use WEATHER MATE.
Surface Preparation
All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.
Application
Reference should be made to the recommended joint ratios. If necessary reduce joint depth using EXPANDING FILL AND FIX FOAM, or Joint backer rod. Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.
Smooth down within 10 minutes of application. To ensure a proper bond, always smooth the sealant down using a spatula or piece of wood wetted with a soap and water solution. An improved appearance can be achieved by placing masking tape to both sides of the joint and removing within 5 minutes of application.
Specifications
Specification
Colour - Brown
Quantity - 25
Movement accommodation: + or -12.5% ISO8339
Skinning time: 5 mins @ 20 C
Cure time: 2mm per 24 hours
Hardness Shore A: 15-25
Service temperature resistance: -30 C to + 150 C
Application temperature resistance +5 C to + 40 C
Tensile Strength 1.5 MPa
Stress 0.3MPa at 100% elongation DIN53504
Specific gravity: ~1.00
Cleaning: Uncured sealant white spirit;
Cured sealant: EVERFLEX SILICONE EATER
Minimum joint width: 4mm
Maximum joint width: 25mm
Joint ratio: Maximum depth 50% of joint width
Coverage: @ 10 linear metres, 9 x 9mm fillet joint
Elongation at break: >400% ISO8339
Colour - Brown
Quantity - 25
Movement accommodation: + or -12.5% ISO8339
Skinning time: 5 mins @ 20 C
Cure time: 2mm per 24 hours
Hardness Shore A: 15-25
Service temperature resistance: -30 C to + 150 C
Application temperature resistance +5 C to + 40 C
Tensile Strength 1.5 MPa
Stress 0.3MPa at 100% elongation DIN53504
Specific gravity: ~1.00
Cleaning: Uncured sealant white spirit;
Cured sealant: EVERFLEX SILICONE EATER
Minimum joint width: 4mm
Maximum joint width: 25mm
Joint ratio: Maximum depth 50% of joint width
Coverage: @ 10 linear metres, 9 x 9mm fillet joint
Elongation at break: >400% ISO8339
EAN: 5029347904135
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard
Zone 1 – £9.99
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland.
Zone 2- £14.99
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary.
Zone 3 – £19.99
Estonia, Spain, Sweden, Italy, Portugal, Latvia.
Zone 4 – £29.99
Bulgaria, Finland, Romania.
Zone 5 – £49.99
Bosnia, Croatia, Switzerland.
Zone 6 – £59.99
Norway, Serbia, Iceland.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items.
If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review