Subscribe
TO OUR NEWSLETTER
Subsribe to our email newsletter today to receive product news and special offers!
Everbuild Gun Grade Expanding Foam Gap Filler 750ml PACK OF 4 EVGF7
Stock Code:
EVGF7_4
View All: Sealants
View All Everbuild Sika Products
£24.95
£20.79
Out of Stock - This Product is Currently Unavailable
Description
Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Designed for professional use in conjunction with Gun Foam Applicators.
USES
Filling
Gaps around pipe entries through walls.
Gaps around window frames, door frames.
Electrical wire chasing prior to plastering
Deep joints prior to applying sealant or plaster
Irregular gaps in stone, brick, concrete or plaster
Fixing
Door frames
Timber structures
Window sills and thresholds.
Window frames
Insulating
Behind cladding to exterior walls.
Behind soffit and barge boards
CHARACTERISTICS / ADVANTAGES
Quick setting - can be cut, sawn or plastered in 1
hour.
Economical in use - expands up to 50 times its original
volume.
Fills irregular and broad gaps where most conventional
fillers would fail.
Possesses insulating and sound deadening properties.
Expansion 37 litres (750ml can)
Cell Structure Medium fine
Temp Res Of Cured Bead Long Term: -40 to +80oC
Short Term: -40 to +100oC
Full Load Bearing Stability
App, 12 hours (20mm
bead)
APPROVALS / STANDARDS
Building Material Class - B3
USES
Filling
Gaps around pipe entries through walls.
Gaps around window frames, door frames.
Electrical wire chasing prior to plastering
Deep joints prior to applying sealant or plaster
Irregular gaps in stone, brick, concrete or plaster
Fixing
Door frames
Timber structures
Window sills and thresholds.
Window frames
Insulating
Behind cladding to exterior walls.
Behind soffit and barge boards
CHARACTERISTICS / ADVANTAGES
Quick setting - can be cut, sawn or plastered in 1
hour.
Economical in use - expands up to 50 times its original
volume.
Fills irregular and broad gaps where most conventional
fillers would fail.
Possesses insulating and sound deadening properties.
Expansion 37 litres (750ml can)
Cell Structure Medium fine
Temp Res Of Cured Bead Long Term: -40 to +80oC
Short Term: -40 to +100oC
Full Load Bearing Stability
App, 12 hours (20mm
bead)
APPROVALS / STANDARDS
Building Material Class - B3
Specifications
TECHNICAL INFORMATION
Compressive Strength 5N/cm² (DIN 53421) at 10% stress.
Tensile Strength 18N/cm² (DIN 53455)
Elongation at Break Elongation At Tension - 30% (DIN 53455)
Shear Strength 8N/cm² (DIN 53422)
Dimensional Stability Full Load Bearing Stability - App, 12 hours (20mm bead)
Thermal Resistance Thermal Conductivity - 0.04 W/Mk (DIN 52612)
Water Absorption 0.3 Vol % (DIN 53428)
APPLICATION INFORMATION
Ambient Air Temperature 5°C to 25°C. (Optimum 20°C)
Cutting Time 20 mins to 1 hour depending on bead dimensions.
Tack Free Time Approx. 8 minutes
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound and free from dust
and loose particles. Moisten surfaces to be sealed with
water. This assists the curing process.
APPLICATION METHOD / TOOLS
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times).
Carefully fix nozzle. Do not overtighten or force.
ALWAYS USE CAN UPSIDE DOWN. For EVERBUILD®
Gun Grade Expanding Foam, tighten securely into one
of our range of guns.
Only partially fill cavities as the foam will expand to fill
the remaining space. Any excess foam can be removed
whilst still wet with EVERBUILD® FOAM CLEANER.
Cured foam must be removed mechanically. When
used for fixing door frames, supports must be used until
the foam is fully cured.
Please note:
When transported in cars, keep in boot, out of direct
sunlight. When removing cured foam from skin, take
care not to damage with abrasives.
IMPORTANT – Re-use is only possible by cleaning the
nozzle and valve tip with EVERBUILD® DUAL PURPOSE
FOAM CLEANER before the foam has cured. Do not
push any object into the valve as the contents may explode.
LIMITATIONS
Carefully read instructions and text in warning box
before use.
Do not over-pressurize container.
Always apply above 5°C.
Clean spills immediately with EVERBUILD® FOAM
CLEANER.
When using EVERBUILD® Gun Grade Expanding
Foam, always clean the gun thoroughly with EVERBUILD®
FOAM CLEANER until the jet is clear of foam.
Compressive Strength 5N/cm² (DIN 53421) at 10% stress.
Tensile Strength 18N/cm² (DIN 53455)
Elongation at Break Elongation At Tension - 30% (DIN 53455)
Shear Strength 8N/cm² (DIN 53422)
Dimensional Stability Full Load Bearing Stability - App, 12 hours (20mm bead)
Thermal Resistance Thermal Conductivity - 0.04 W/Mk (DIN 52612)
Water Absorption 0.3 Vol % (DIN 53428)
APPLICATION INFORMATION
Ambient Air Temperature 5°C to 25°C. (Optimum 20°C)
Cutting Time 20 mins to 1 hour depending on bead dimensions.
Tack Free Time Approx. 8 minutes
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
Ensure all surfaces are clean, sound and free from dust
and loose particles. Moisten surfaces to be sealed with
water. This assists the curing process.
APPLICATION METHOD / TOOLS
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times).
Carefully fix nozzle. Do not overtighten or force.
ALWAYS USE CAN UPSIDE DOWN. For EVERBUILD®
Gun Grade Expanding Foam, tighten securely into one
of our range of guns.
Only partially fill cavities as the foam will expand to fill
the remaining space. Any excess foam can be removed
whilst still wet with EVERBUILD® FOAM CLEANER.
Cured foam must be removed mechanically. When
used for fixing door frames, supports must be used until
the foam is fully cured.
Please note:
When transported in cars, keep in boot, out of direct
sunlight. When removing cured foam from skin, take
care not to damage with abrasives.
IMPORTANT – Re-use is only possible by cleaning the
nozzle and valve tip with EVERBUILD® DUAL PURPOSE
FOAM CLEANER before the foam has cured. Do not
push any object into the valve as the contents may explode.
LIMITATIONS
Carefully read instructions and text in warning box
before use.
Do not over-pressurize container.
Always apply above 5°C.
Clean spills immediately with EVERBUILD® FOAM
CLEANER.
When using EVERBUILD® Gun Grade Expanding
Foam, always clean the gun thoroughly with EVERBUILD®
FOAM CLEANER until the jet is clear of foam.
EAN: 5055995542580
Buyaparcel offer delivery throughout the United Kingdom, including Northern Ireland, Scottish Highlands and other Islands of the UK. In addition we can now also deliver through Europe.
UK Delivery Prices
Standard delivery is free with no minimum order charge to most mainland UK delivery addresses. Surcharges can apply to certain postcodes depending on the service type. For full details visit our Delivery Guide.
In additional to our standard service we also offer some premium delivery services if you need your item quickly
£0.00 - Standard UK Delivery (2-3 Days Approx)
£2.99 - Next Day UK Delivery (Orders placed before 3.00pm Monday - Friday)
*orders placed after 3.00pm Friday will still be delivered Monday if ordered before 11am Saturday Morning
£8.99 - Saturday Delivery (Orders placed before 3.00pm Friday)
£36.00 - Pallet Delivery (2-3 Days Approx - selected products only)
Alternatively if you view your parcel once items have been added and enter your postcode you will see what derlivery services are available.
International Delivery Prices
In addition we now deliver through Europe on a 48 Hour Delivery Service as Standard
Zone 1 – £9.99
Belgium, Germany, Luxembourg, France, Netherlands, Rep Ireland.
Zone 2- £14.99
Austria, Denmark, Czech Republic, Poland, Lithuania, Hungary.
Zone 3 – £19.99
Estonia, Spain, Sweden, Italy, Portugal, Latvia.
Zone 4 – £29.99
Bulgaria, Finland, Romania.
Zone 5 – £49.99
Bosnia, Croatia, Switzerland.
Zone 6 – £59.99
Norway, Serbia, Iceland.
Is My Item Available for Next Day Delivery?
If your item is stocked in our immediate picking location it will available for you to choose a next day delivery. This will be highlighted by a green tick and a 1 day dispatch time on the item information. 
You will have the option to choose this service if you are purchasing your item for delivery to mainland UK.
What courier will my item be delivered with?
If your item is being delivered in the UK or Ireland, it will be delivered by UK Mail/DHL, Hermes or Royal Mail, with the exception of pallet items.
If you are an international customer, your goods will initially be sent via UK Mail/DHL, and then exported to either Eurodis or DHL. The appropriate tracking can be provided when necessary.
Details of each courier service we offer are detailed in our Delivery Guide.
Is My Item Available for Click and Collect at your Lowestoft Store?
If your item is showing "In Stock" then you will be able to do a Same Day Click and Collect order from our Lowestoft Pinbush Road. Our cut off for same day collections is 3.00pm Mon-Fri / 11.00am Saturday. After that the product will be ready the next day for collection. After the cut off you are welcome to do a Call and Collect order by phoning our trade counter on 01502 507666. If your item is in stock you will still be able to do a same day collection and payment.
Our store is open Monday to Friday 8.00am - 5.00pm and Saturday 8.00am - 12.00pm so any orders placed the remainder of the weekend will be available for collection on Monday. Weekdays any orders placed up to midnight will be available for collection the following day. This excludes bank holidays.
Please wait for email confirmation your order is ready for collection from our store before you travel.
On collection we will require you to show a copy of your order confirmation, electronic or printed. In addition to this please bring photo ID which must be your passport or photo driving licence, matching the name on the PayPal/Amazon/Credit or Debit card used.
Collection option only available to NR and IP Postcodes
We've simplified our returns process! We now offer a no-questions-asked, free returns service within the first 30 days (subject to T&Cs).
You can find our returns information in our Terms and Help page
Spread the cost of your Buyaparcel purchase with Paypal Credit - Get 0% finance over 4 months! The perfect way to spread the cost of any purchases of £99 (inc vat) or more
Applying is that simple. If approved and you accept, you'll have a credit limit added to your PayPal account ready to use immediately. Plus, you'll automatically get 0% interest for 4 months on all your purchases of £99 or more.*
How to apply for Paypal Credit with Buyaparcel?
You have 2 ways to purchase from us with the option us using Paypal Credit.
1 - From the product page you can use Paypal Express Checkout which will take you straight to your Paypal account where you can login to complete payment or apply for Paypal Credit.
2 - If you add your product to your parcel and click "Proceed to Checkout" you will then go to our payment page. Select "Paypal Express Checkout" from the payment methods available and click "Place Order".
Once you are in your Paypal account choose PayPal Credit from the payment options.
If this is the first time you have used PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
More Information on Paypal Credit
Write Your Own Review